Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Angeles
Gate installation in Los Angeles isn’t a one-size-fits-all job. Between the hillside lots in Laurel Canyon, the 1920s Spanish Colonials in Silver Lake, and the ranch homes lining the Valley, the right gate for your driveway depends on slope, wind, age of the house, and how the gate will actually be used every day. We’re the local team that understands those differences. We’ve built, hung, welded, automated, and rebuilt gates across Los Angeles for over 42 years, and we’ll tell you straight what your driveway needs. Call (619) 350-4659 for a free estimate, and we’ll send a technician who actually works in Los Angeles, not a call center.
Why Ironworks Gate Co. Is Los Angeles’s Preferred Gate Installation Company
A gate is only as good as the day it was hung. Hang it level on a sloped driveway, and you’ll watch it drag an arc into the concrete within a season. Undersize the operator for a gate that catches Santa Ana wind, and the motor burns out the following October. Los Angeles throws both problems at homeowners, often on the same property. That’s why we don’t send a generic installer. We send a gate specialist who has seen how gates fail across Los Angeles neighborhoods, from Mount Washington to West Adams to the Palisades, and who knows what actually holds up here.
Our crews are background-checked and uniformed, working under the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every job we finish is covered by the 90-Day Done Right Promise, a written guarantee from Victor Salinas, our owner. If something isn’t right, we come back and make it right. No paperwork, no arguing.
We’re also the company homeowners call when a previous contractor walked away halfway through. We hear it regularly in neighborhoods like Los Feliz and Highland Park: a gate that worked for a month, then started binding, then stopped closing altogether. We fix it correctly the first time, with the parts and the welding skill the job actually calls for.
Our Gate Installation Services in Los Angeles
Driveway Gate
A driveway gate in Los Angeles does more than close off the property. It’s the first line of security, often the first thing a guest sees, and on a sloped lot, it’s the piece of hardware that gets punished the hardest. We install single and double driveway gates built for the actual conditions on your street: the grade, the prevailing wind, the width of the apron. Whether you want ornamental wrought iron to match a 1930s home or a clean modern steel gate, our Gate Installation team handles the full scope, from footings to finish welds to the operator.
Pedestrian Gate
Pedestrian gates take a beating in Los Angeles: mail carriers, gardeners, kids, delivery drivers, and the occasional gate slam. We install and hang pedestrian gates that stay square and swing true year after year. If the gate is next to a driveway gate, we’ll match the metal, the finish, and the latching hardware so the whole entry looks like it was designed together, not bolted on later.
Sliding Gate
This is the most practical gate for Los Angeles hillsides. A slide gate moves parallel to the fence line, so it never arcs into a sloped driveway. On steep lots in Hollywood Hills or Laurel Canyon, we routinely convert failing swing gates to cantilever slide gates. The difference is immediate: no dragging, no binding, no gate left hanging open at a 45-degree angle because the operator gave up. We install V-groove and cantilever slide systems, sized for the gate weight and the number of cycles per day.
Swing Gate
Swing gates still make sense on flat lots, especially where the driveway is wide and ornamental gates suit the home’s architecture. The key is hanging them correctly from day one: proper post depth, proper hinge weight rating, proper operator torque. On flat Los Angeles lots, like much of the Westside and the mid-Wilshire area, a well-hung swing gate can last decades. On sloped lots, we’ll be honest with you: a swing gate may never work the way you want, and a slide conversion is often the smarter spend.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
We’re trained and equipped on nine gate-automation brands, which matters in Los Angeles because different neighborhoods have different legacy hardware. A DoorKing board from a 1990s install in Sherman Oaks needs different care than a new Viking operator on a Beverly Hills estate. We service Viking, Ghost Controls, DoorKing, and Elite, among others, and we keep stock of common parts locally so a repair or install doesn’t wait on a warehouse three states away. Whatever is on your driveway, the right fix happens on the first visit.
Common Gate Installation Problems We See in Los Angeles Homes
- Hillside swing gates dragging on the driveway. A swing gate hung level at the post can carve a 2 to 4 inch arc into the concrete by the latch side, because the lot settled or the driveway was poured on a grade. The fix is usually a cantilever slide conversion, not another adjustment.
- Santa Ana wind bending aluminum gates. Gusts over 60 mph through Sepulveda Pass and the canyon communities physically rack lightweight aluminum swing gates off their hinges and overload operators not rated for sustained wind. We see the damage every autumn, especially in foothill neighborhoods like Mount Washington.
- Corrosion from marine air near the coast. Salt-laden air from Malibu through San Pedro eats hinge posts, rollers, and electrical contacts faster than the dry inland climate. Coastal gate hardware fails years earlier than the same hardware in Glendale or Pasadena.
- Old operators on aging ranch homes. The San Fernando Valley’s 1950s to 1970s ranch homes are often on their second or third generation of slide-gate hardware: worn nylon rollers, obsolete control boards, and tracks worn through. Sometimes the best install is a full rail, roller, and board replacement on the existing gate. Other times, a new gate is cheaper than chasing a dying frame.
Pricing for Gate Installation in Los Angeles, CA
A single driveway gate installation in Los Angeles typically runs $3,800 to $9,500, depending on the gate material, width, operator, and site conditions. A pedestrian gate installation typically runs $1,200 to $3,200. A hillside swing-to-slide conversion, including the new track, cantilever hardware, operator, and welding, usually sits between $6,000 and $12,000. Coastal corrosion repairs, including new posts and hinge hardware, often run $800 to $2,500. Every price is quoted and agreed before any work starts. We don’t start turning bolts until you’ve seen the number. Call (619) 350-4659 for a free written estimate.
We Also Serve Cities Near Los Angeles
Our Gate Installation in Los Angeles crews also cover nearby communities including Inglewood, Culver City, Playa del Rey, and Beverly Hills. If you’re a few blocks outside the city line, we’re still close enough to quote and schedule without the long dispatch delays.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Angeles
Your driveway was likely poured on a grade, or the lot has settled since the gate was hung, so a gate that was level at the post is now low at the latch side. The permanent fix is a cantilever slide gate conversion, not another hinge adjustment. Call (619) 350-4659 and we’ll assess it in person.
Yes, in most cases. In Silver Lake, our crew replaced a 1930s wrought-iron swing gate on a Spanish Colonial Revival home where the original hinge post had rotted at the footing and the panel sagged 3 inches. We cut out the failed post, poured a new reinforced concrete base, and retrofitted the ornamental gate with a LiftMaster operator and safety photocells to meet UL 325 entrapment standards. The historic look stayed; the gate now closes like new.
Santa Ana gusts above 60 mph bend lightweight aluminum swing gates off their hinges and overload operators that aren’t rated for sustained wind resistance. Foothill neighborhoods like Mount Washington see the worst of it from October through March. The fix is a heavier gate panel, a higher-torque operator, or a slide system that presents less surface to the wind.
It depends on what’s failing. If the steel frame and panel are still sound, replacing the rail, rollers, and operator board often costs $2,000 to $4,500. If the frame is rusted through or the track is worn beyond adjustment, a full replacement typically runs $4,500 to $9,500. We’ll show you the condition of your existing gate and quote both paths honestly. Call (619) 350-4659 for a free estimate.
The marine layer carries salt-laden air that accelerates corrosion of hinges, rollers, and electrical contacts. A coastal gate can fail five to ten years earlier than the same hardware inland. We install marine-grade hardware and sealed electrical enclosures for coastal Los Angeles properties, from Malibu through San Pedro.
Your gate is the first thing that greets you when you come home and the last thing that protects you at night. We build and hang gates in Los Angeles that work in this city, on these hills, in this wind, on these old streets. Call (619) 350-4659 for a free estimate. A live person answers, day or night.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Angeles for over 42 years.