Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Culver City
Gate installation in Culver City means working with a five-square-mile city that packs in 1920s bungalows, mid-century apartments, and major entertainment campuses side by side. We quote every job with an upfront price agreed before any work starts, and we install driveway, pedestrian, sliding, and swing gates that are built for the marine layer, the soil, and the way this city actually lives. Call (619) 350-4659 for a free estimate, and we’ll send a background-checked, uniformed technician who knows Culver City block by block.
Why Ironworks Gate Co. Is Culver City’s Trusted Gate Installation Team
We have been doing gate work for over 42 years, and the calls we get from Culver City homeowners tend to follow a pattern. A 1930s bungalow in Carlson Park has an ornamental swing gate that has sagged on its hinges. A Fox Hills complex has a shared pedestrian gate whose operator gave out under traffic it was never rated for. A Hayden Tract office retrofit needs a sliding gate on a slab that was never poured with gate posts in mind.
Our crews work throughout Culver City every week, so we know the alleys off Washington Boulevard, the narrow driveways in the Park District, and the steep lots in Blair Hills. We do not send a generalist. We send gate people. Victor Salinas runs our installation crews, and every job is protected by our written 90-Day Done Right Promise. If it is not right, we come back and make it right. No arguing.
We answer the phone with a live person, 24 hours a day. Not an answering service. Not a callback queue. When a gate fails on a studio lot access point or a homeowner’s driveway at 7 a.m., someone picks up.
Our Gate Installation Services in Culver City
Driveway Gate Installation
A typical Gate Installation for a Culver City driveway runs between $4,800 and $9,500 depending on the gate’s width, material, and automation package. We install steel and ornamental iron driveway gates across the city, from the wide frontages near Culver Boulevard to the tighter lots tucked behind Sepulveda. Marine-layer moisture is a real factor here, so we spec powder-coated finishes and sealed operator housings as standard practice, not an upgrade.
Pedestrian Gate Installation
Pedestrian gates in Culver City’s older neighborhoods often need to match existing 1920s and 1930s ironwork. We fabricate custom gates that match latch styles, picket profiles, and hinge details so the new work does not look like an afterthought. A pedestrian gate with a basic keypad entry and magnetic lock typically runs $2,200 to $4,000 installed in Culver City.
Sliding Gate Installation
Sliding gates are common in Culver City on longer driveways and commercial properties, especially in the Fox Hills area and along Washington Boulevard. We build cantilever sliding gates where possible so no track sits in the dirt to clog or corrode. A standard automated sliding gate in Culver City runs $6,500 to $12,000, with the final number depending on gate length, operator class, and whether we need to pour a reinforced footing for the post and track.
Swing Gate Installation
Swing gates remain the signature look for Culver City’s older residential streets. We pair them with operators from Viking, LiftMaster, and FAAC, chosen for the gate’s weight and usage. A double swing gate on a Culver City driveway, with automation and safety loops, typically runs $5,500 to $10,500 installed. We build the hinge posts deep, because soil near the Ballona Creek channel can shift more than homeowners expect.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Culver City
We are trained and equipped on nine gate-automation brands, including LiftMaster, Viking, and Elite, so whatever is on your property, the correct fix is likely made on the first visit. For Culver City customers we keep common boards, remotes, and safety-edge components on the truck, which means a repair that might take another company a week to order parts for can often be finished same day. We stock local parts because we know a gate that does not open is not a minor inconvenience. It is a locked driveway.
Common Gate Installation Problems We See in Culver City Homes
- Marine-layer corrosion on hinge posts and operator housings: Culver City sits about five miles from the Santa Monica coastline, well inside the marine layer belt. Iron and steel components take on overnight moisture and mild salt air most of the year, and we regularly see hinge posts that have corroded to the point of binding, and operator housings with rust creeping under the powder coat. We install sealed housings and stainless hardware as a local standard.
- Retrofitted gates on converted Hayden Tract warehouses: Many of the old industrial buildings along the Hayden Tract and Washington Boulevard creative-office corridor now have automated gates installed on slabs and footings that were poured decades before anyone planned a vehicle entrance. Undersized post footings shift over time, throwing off rack and pinion alignment on slide gates. We rebuild footings properly and realign the operators.
- Residential-grade operators on Fox Hills apartment gates: Multi-unit complexes in Fox Hills are full of aging shared gates with operators rated for residential traffic being asked to handle commercial volumes. Motors burn out, gears strip, and homeowners get stuck with repeated bills. We replace these with operators rated for the actual cycle count, which costs more up front and saves money within a year or two.
- Pre-war bungalow driveways with no poured foundation: A lot of Culver City’s 1920s and 1930s homes never had a concrete driveway designed for gate posts. The Park District and Carlson Park are full of driveways with thin paving and no structural footing beneath. We pour deep concrete footings for the hinge posts so a heavy ornamental gate does not sag or lean within a season.
Pricing for Gate Installation in Culver City, CA
Here is what Culver City homeowners and property managers can expect for gate installation, stated plainly. A pedestrian gate with keypad entry runs $2,200-$4,000. A driveway swing gate with automation runs $5,500-$10,500 for a double, and $3,800-$6,800 for a single. A sliding driveway gate runs $6,500-$12,000. Custom fabricated ornamental gates start around $8,000 and go up from there depending on size and detailing. These prices include labor, hardware, and standard automation; non-standard footings, underground operator placements, and custom ironwork add to the number. Every quote is written and agreed before we start. We also offer a Free Second Opinion on any written estimate. If you already have a quote from another company, bring it. We will look at it honestly.
| Gate Type | Typical Culver City Price Range |
|---|---|
| Pedestrian gate with keypad | $2,200 - $4,000 |
| Single swing driveway gate with automation | $3,800 - $6,800 |
| Double swing driveway gate with automation | $5,500 - $10,500 |
| Sliding driveway gate with automation | $6,500 - $12,000 |
| Custom fabricated ornamental driveway gate | $8,000+ |
We Also Serve Cities Near Culver City
Our Culver City installation crews regularly take calls from neighboring communities. We serve gate installation in Marina del Rey, Playa del Rey, Venice, and Inglewood, so if your property is on the edge of Culver City or just outside the city line, the same team can handle it. Call (619) 350-4659 and we will confirm coverage for your street.
Serving Culver City, CA - Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Culver City
Culver City sits roughly five miles from the Santa Monica coastline and is squarely inside the marine-layer belt, which means overnight moisture and mild salt air reach gate operators year-round. Burbank and Pasadena sit further inland and get far less of that coastal air. The result in Culver City is faster surface rust on hinges, corrosion inside operator housings, and earlier failure on unsealed boards. We spec sealed housings and stainless hardware on every Culver City installation. Call (619) 350-4659 if you are seeing rust or moisture inside your operator.
Yes. We routinely automate existing ornamental iron gates in the Park District, Carlson Park, and Blair Hills. We install a hinge post with a deep concrete footing, mount the operator, and add safety photocells and loop detectors while retaining the original ironwork. One recent Park District job involved a restored 1930s bungalow with a handsome heavy iron gate and a driveway that had no poured foundation. Our crew set a new hinge post in a deep footing, paired a Viking swing gate operator with a LiftMaster keypad entry and camera intercom, then tuned the photocells and loop detector so the gate opens and closes silently without sag. If the ironwork itself is structurally sound, we leave it alone and work around it. Call (619) 350-4659 for an evaluation.
The Hayden Tract and Washington Boulevard corridor are full of converted 1920s industrial warehouses that were never built with vehicle gates in mind. That usually means the existing slab has no structural footing where posts need to go, so contractors must pour new concrete footings, and often the operator cannot be mounted in a standard location. These jobs are custom by default. We survey the driveway, check the slab, and design the gate and operator placement around what the building will actually support. Expect the scope to include concrete work, custom post fabrication, and an operator rated for the traffic volume. Call (619) 350-4659 and ask for a free site survey.
California law requires gate operators to have entrapment protection devices, which in practice means photocells, safety edges, or both, depending on the gate type and placement. A slide gate needs a primary and secondary entrapment protection mechanism. A swing gate needs entrapment protection on the closing edge. We install UL 325-compliant operators and set the entrapment protection as part of every automated gate installation in Culver City. This is not optional, and we will not install an operator without it. Call (619) 350-4659 if you want a written quote that includes all required safety devices.
Yes. Blair Hills has steep lots and driveways where running a power line to the gate would require a messy trench through a hillside, so solar gate openers are a practical answer for many homes there. We install solar operators from brands like Mighty Mule and LiftMaster, sized to your gate’s weight and your daily cycle count. The tradeoff with solar is straightforward: fewer opening cycles per day than a wired operator, and the panel needs direct sun. On a shaded Blair Hills lot, that matters. We will tell you honestly whether solar will work for your gate, and give you a written price before we start anything. Call (619) 350-4659 for a consultation.
Call Ironworks Gate Co. for Gate Installation in Culver City
A gate that sags, binds, or simply refuses to open should not be a career project. We have been doing this for over 42 years, and we stand behind every job with the 90-Day Done Right Promise, in writing. The price is agreed before any bolt is turned, and a live person answers the phone around the clock. Call (619) 350-4659 now for a free estimate on gate installation in Culver City, and ask about our $50 Off Any Repair Over $250, the Free Second Opinion on any written estimate, or our 5% discount for seniors and veterans.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Culver City with gate installation and repair.