Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Los Angeles
Gate parts and welding in Los Angeles most often comes down to one of three jobs: a sagging hinge post that has pulled out of plumb on a hillside lot, a cracked weld on a 90-year-old wrought-iron gate, or a full conversion from a swing gate to a cantilever slide gate because the driveway grade simply won’t allow a standard swing. A typical hinge replacement in Los Angeles runs $240-$480, post replacement $600-$1,400 depending on footing work, and custom welding repairs $180-$650 per repair point. Ironworks Gate Co. handles all of it, with crews dispatched from our Los Angeles office and a live person answering the phone at (619) 350-4659 around the clock. Our Gate Parts & Welding team knows the hills, the salt air, and the Santa Ana wind load that shape gate failures here better than any generalist ever will.
Why Ironworks Gate Co. Is Los Angeles’s Preferred Gate Parts & Welding Company
Los Angeles is not a forgiving city for gates. The hillside lots that make this city famous also make it one of the most demanding gate-repair markets in the country, and a company that learned its trade on flat suburban grids will not last three summers here. We have spent over four decades learning what fails, why it fails, and how to fix it so it stays fixed. Los Angeles homeowners call us because we show up when we say we will, quote the price before a single bolt is turned, and put the guarantee in writing. Every job, from a simple latch repair to a full Los Angeles hillside conversion, is backed by our 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing.
Victor Salinas leads our Los Angeles crews, and the standard he sets is simple: work in a customer’s home the way you would work in your own mother’s. Our technicians are background-checked and uniformed, and every one of them carries the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. Los Angeles homeowners who have been let down before tend to notice the difference quickly. It shows in the work, and it shows on the bill. The price quoted is the price paid, agreed before work starts, every time.
Our Gate Parts & Welding Services in Los Angeles
Hinge Replacement
Hinge replacement in Los Angeles is rarely a simple swap. On the steep grades of neighborhoods like Mount Washington and Silver Lake, a hinge that looks worn on the surface is often the symptom of a post that has shifted, a gate that has racked, or years of wind load working against the metal. We replace hinges, shim and re-align the leaf, and tell you honestly whether the post underneath needs attention too. A hinge replacement alone typically runs $240-$480, and we carry the heavy barrel hinges, adjustable hinges, and ball-bearing hinges that older Los Angeles gates require.
Post Replacement
Post replacement is the most common hillside repair we do in Los Angeles. When a lot settles, the hinge post leans, and the gate begins dragging an arc into the driveway at the latch side. We dig out the old footing, set a new post in concrete, and brace it so it stays plumb through the next decade of Santa Ana seasons. On a Laurel Canyon driveway, we replaced a sagging hinge post that had pulled 3 inches out of plumb after years of Santa Ana wind load, and converted the homeowner’s bent aluminum swing gate to a cantilever slide gate with a LiftMaster operator and new safety photocells. The gate now clears the 12-degree grade without dragging. Post replacement in Los Angeles generally runs $600-$1,400 depending on footing depth, access, and whether the old concrete needs breaking out.
Rail Repair
Slide gates live and die by their rail. In the San Fernando Valley, where 1950s and 1960s ranch homes are now on their second or third generation of slide-gate hardware, we see worn V-groove tracks, bent rails, and rollers that have ground themselves flat over decades of use. We straighten or replace rails, reset roller brackets, and adjust the gate so it travels true. Rail repair runs $300-$900 for most Los Angeles residential gates, and we stock common rail profiles so we are not waiting on a parts order while your gate sits stuck halfway open.
Custom Welding
Los Angeles has a stock of ornamental ironwork that most cities lost decades ago. The 1920s Spanish Colonial Revival homes in Los Feliz, Silver Lake, and West Adams still have original wrought-iron and tubular-steel gates, and those gates crack, fatigue, and snap at the welds after ninety years of use. We weld them back with matching material and profile so the repair does not look like an afterthought. Custom welding runs $180-$650 per repair point in Los Angeles, and for more involved work we fabricate replacement scrolls, pickets, and frame sections in-shop before we ever touch your gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
Most Los Angeles gates are automated, and the operator matters as much as the metal. Our technicians are trained and equipped on nine major gate-automation brands, including LiftMaster, DoorKing, and Elite, so the correct fix happens on the first visit, whatever is mounted on your driveway. We keep common parts for Ghost Controls and Mighty Mule operators in our Los Angeles service vehicles, which means less waiting and fewer second trips. When a Santa Ana wind event overloads an operator, we can usually have it running again the same day.
Common Gate Parts & Welding Problems We See in Los Angeles Homes
- Hinge posts pulling out of plumb on hillside lots. As Los Angeles hillside lots settle, swing gates begin dragging 2-4 inch arcs into the driveway at the latch side. This almost always ends in a cantilever slide-gate conversion rather than a simple adjustment, because the grade itself is working against the gate.
- Santa Ana wind damage to aluminum panel gates. Winds exceeding 60 mph through Sepulveda Pass and the canyon communities bend lightweight aluminum gates and burn out operators not rated for sustained wind load. October through March is our busiest season for wind-related repair in foothill neighborhoods.
- Rusted hinges, rollers, and contacts in coastal neighborhoods. From Malibu through San Pedro, salt-laden marine air accelerates corrosion far faster than the dry inland climate. Gates that look fine from ten feet away are often failing at the roller bearings and electrical terminations.
- Cracked welds on 1920s-1940s ornamental gates. The original wrought-iron and tubular-steel gates on Spanish Colonial Revival homes in Los Feliz, Silver Lake, and West Adams fatigue at the welds after decades of thermal cycling. These need welded repair with matching material, not a replacement panel that would look wrong on an 80-year-old house.
Pricing for Gate Parts & Welding in Los Angeles, CA
Los Angeles gate repair pricing reflects the terrain, the age of the housing stock, and the cost of doing business in this city. Hinge replacement typically runs $240-$480. Post replacement runs $600-$1,400 depending on footing condition and access. Rail repair runs $300-$900. Custom welding runs $180-$650 per repair point, with fabrication work quoted separately. A full hillside conversion from swing to cantilever slide gate, including the operator and safety photocells, generally runs $2,800-$5,500. Every price is quoted and agreed before any work starts, so the bill never surprises you. Standing offers apply to Los Angeles customers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans receive a permanent 5% discount. Call (619) 350-4659 for a free estimate. We will tell you what it costs before we touch anything.
We Also Serve Cities Near Los Angeles
Ironworks Gate Co. serves Los Angeles and the surrounding communities, including Inglewood, Culver City, Playa del Rey, and Beverly Hills. If you are in one of these nearby cities and need gate parts or welding work, the same crews, the same pricing, and the same 90-Day Done Right Promise apply.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Los Angeles
The hinges may look fine because they are not the problem. On steep Hollywood Hills lots, the hinge post has usually leaned out of plumb as the hillside settled, which lets the gate drop at the latch side and drag an arc into the driveway. The fix is post replacement and re-setting the gate, or converting to a cantilever slide gate that clears the grade regardless of settlement. Call (619) 350-4659 and we will assess it straight.
Yes. We match the existing material and profile, weld the crack, and grind the repair so it blends into the original work. For broken scrolls or pickets, we fabricate replacement sections in-shop before welding them in place. These repairs take care and time, and we treat a 90-year-old gate like the piece of the house it is.
Santa Ana winds sustain 50-80 mph gusts in the Sepulveda Pass corridor, which overloads operators not rated for high wind resistance and racks lightweight aluminum swing gates off their hinges. If your operator has failed during a wind event, it likely fought the wind until the motor gave out. We recommend operators with proper wind resistance ratings for exposed canyon locations. Call (619) 350-4659 for a free assessment before the next wind season.
If there is no conduit or mains power at the gate, solar is the practical choice. A solar gate opener with battery backup is standard for rural and acreage entrances across the San Fernando Valley, and we size the panel and battery to the gate’s cycle count and shade conditions. We install solar-capable operators across all the major brands we service, and we will quote the full power run and equipment before work begins.
Salt-laden marine air accelerates corrosion on hinges, rollers, and electrical contacts far faster than inland Los Angeles. The micro-layer of salt on every surface attacks bare steel and aluminum connections, especially at the roller bearings and wire terminations. We use corrosion-resistant hardware and marine-grade coatings on coastal jobs, and we recommend an annual inspection to catch rust before it seizes a roller or opens a circuit. Call (619) 350-4659 to schedule a look.
If your gate is dragging, cracked, rusting, or simply not working the way it should, call Ironworks Gate Co. at (619) 350-4659. A live person answers, 24 hours a day, 7 days a week. We will give you an honest assessment, a written price, and work that stands behind the 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Angeles gate parts and welding.