Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Los Angeles
Gate repair in Los Angeles usually runs between $195 and $680 for most hinge, post, and operator work, and our trucks are already on the road across the basin every day. If your gate is dragging on a hillside driveway, rusted at the hinge pins near the coast, or dead after a Santa Ana wind event, call (619) 350-4659 and a live person will answer, not a voicemail tree. We’ve been repairing driveway gates in Los Angeles long enough to know that a gate on Mount Washington fails differently than one in Westchester, and we send a technician who understands the difference.
Why Ironworks Gate Co. Is Los Angeles’s Preferred Gate Repair Company
Victor Salinas founded Ironworks Gate Co. on a simple rule: fix the gate the way you’d fix it at your own mother’s house, and put the promise in writing. That’s why every job we complete in Los Angeles carries our 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. It’s the Keystone Standard, and it applies whether we’re welding a rusted hinge in San Pedro or replacing a burnt-out Viking operator in Beverly Hills.
We answer the phone 24 hours a day, 7 days a week. When a gate won’t close and your property is open to the street, you don’t want a callback queue. Our background-checked, uniformed technicians show up when we say we will, and the price is settled before a single bolt is turned. Los Angeles homeowners remember the last contractor who let them down. We’d rather be the last call they ever have to make.
Our Gate Repair Services in Los Angeles
Electric Gate Repair
When an electric gate in Los Angeles stops responding, the cause is usually one of three things: a failed control board, a dead capacitor, or a motor that’s been running against wind load it was never rated for. In foothill neighborhoods like Tarzana and Porter Ranch, Santa Ana gusts routinely exceed 60 mph, and an operator working against that force will burn out capacitors and strip gears years before its expected lifespan. Our Gate Repair team arrives with diagnostic equipment and replacement parts for nine major brands on the truck, so most electric gate repairs in Los Angeles are completed in a single visit.
Automatic Gate Repair
An automatic gate that opens halfway, reverses for no reason, or refuses to close is a safety hazard first and an inconvenience second. Los Angeles hillside properties often have gates installed on grades that exceed 20%, which changes how the operator reads the load. We see this constantly in Laurel Canyon and the Hollywood Hills, where a gate that works fine on flat ground will trip its obstruction sensor because the weight shifts as it travels upslope. Our technicians recalibrate force settings, replace worn limit switches, and verify photoelectric safety edges so your gate stops tripping and starts closing reliably.
Hinge & Post Repair
Salt-laden marine air from the Pacific accelerates corrosion on Los Angeles gate hardware far faster than inland areas like Riverside or Glendale ever see. In coastal communities from Malibu through San Pedro, hinge pins seize, posts rust through at the base, and electrical contacts corrode within a few years rather than a few decades. We cut out rusted sections, weld in new steel, and use stainless fixings where they’re actually needed. Most hinge and post repairs in Los Angeles run between $240 and $520 depending on how far the corrosion has spread into the post footing.
Gate Realignment
A gate that scrapes the driveway or won’t latch is rarely just an adjustment issue on Los Angeles hillside lots. When a driveway is poured on a grade and the lot settles over decades, the gate ends up level at the hinge post but dragging at the latch side. We measure the grade, check the post footings, and tell you straight whether this is a sag correction or a conversion to a cantilever slide gate. In steep neighborhoods like Silver Lake and Mount Washington, we do far more slide conversions than simple adjustments, because the geometry only gets worse over time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
Our technicians are trained and equipped on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Los Angeles homes have one of these nine brands on the driveway, which means we show up with the correct board, remote, and sensor on the first trip. We stock common replacement parts locally in Los Angeles, so a Viking operator in Eagle Rock or a DoorKing system in West Adams doesn’t wait a week for a component to ship from a warehouse in another state. The correct fix is made on the first visit, whatever opener is on your property.
Common Gate Repair Problems We See in Los Angeles Homes
- Coastal corrosion at hinge pins and operator boards. The marine layer in Malibu, Playa del Rey, and San Pedro carries salt that eats exposed steel and aluminum contacts far faster than inland air. Hinges that lasted twenty years in Pasadena fail in five on the coast unless they’re galvanized or stainless.
- Wind-load operator failure from Santa Ana events. From October through March, sustained 50 to 80 mph gusts funnel through Sepulveda Pass and canyon corridors, pushing against gate panels and forcing operators to work under load they were never designed for. Capacitors burn out, gears strip, and lightweight aluminum panels bend right off their hinges.
- Hillside settling that drags swing gates into the driveway. On grades over 20%, the lot moves. A gate installed level at the post can carve a 2 to 4 inch arc into the concrete by the latch side within a decade. That’s a conversion to a cantilever slide gate, not a hinge adjustment.
- Rusted welds and fatigued steel on older ornamental gates. The 1920s and 1930s Spanish Colonial Revival homes in Silver Lake, Los Feliz, and West Adams still have their original wrought iron work in many cases. The steel is sound, but the welds at the hinge straps and scroll work fatigue and crack after ninety years of LA sun and coastal damp. We re-weld and reinforce rather than replace, unless the steel has rusted through.
Pricing for Gate Repair in Los Angeles, CA
A straightforward hinge replacement on a Los Angeles gate typically runs $195 to $320. Post repair with new concrete footing lands between $380 and $680 depending on how deep the rust goes. An operator replacement runs $450 to $1,100 with labor included, and a full hillside slide-gate conversion starts around $2,400 and goes up with the length of the gate and the grade of the drive. We quote the full price before any work starts, so the bill never surprises you. If you hold a written estimate from another company, we’ll give you a free second opinion. Call (619) 350-4659 for an exact quote on your gate, free of charge.
We Also Serve Cities Near Los Angeles
Along with our Gate Repair in Los Angeles work, our crews regularly serve Inglewood, Culver City, Playa del Rey, and Beverly Hills. The coastal and hillside conditions in those communities create the same salt-corrosion and slope-settling failures we see across the LA basin. Dispatch and scheduling are coordinated from our Los Angeles office, and our trucks are stationed locally across the metro area.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Los Angeles
Your gate is dragging because the lot has settled since the gate was installed, not because the installer did anything wrong. Silver Lake driveways frequently run on grades over 20%, and when a hillside settles, the post at the latch side drops a few inches relative to the hinge post. The gate then describes an arc that scrapes the driveway by the time it reaches the latch. We measure the grade and the settlement, then either adjust the hinge geometry or convert the gate to a cantilever slide system that doesn’t depend on the driveway staying level. In Laurel Canyon, our crew found a swing gate hinged level at the post but carving a 4-inch arc into the driveway by the latch side, the lot had settled on a slope. We converted it to a FAAC cantilever slide gate with stainless fixings and a new post footing, and the arc is gone. Call (619) 350-4659 and we’ll tell you which fix applies to your driveway.
Santa Ana winds damage automatic gate operators by forcing the motor to work against sustained wind load it was never rated for. Gusts over 60 mph push against the gate panel, and every time the operator has to overcome that resistance, it pulls more current through the motor windings and control board. Capacitors overheat and fail, gears strip, and lightweight aluminum panels can bend right off their hinges. In foothill neighborhoods like Porter Ranch and the Sepulveda Pass corridor, we replace burnt-out operators every autumn and winter. The fix is an operator rated for wind load, along with a heavier gauge panel if yours is bowed. Call (619) 350-4659 and we’ll inspect yours before the next Santa Ana event.
Use galvanized or stainless steel hardware on any gate within a few miles of the Pacific in Los Angeles. The marine layer carries salt that accelerates corrosion dramatically compared to inland areas, and painted mild steel hardware simply doesn’t hold up. We replace rusted hinge pins, straps, and bolts with stainless fixings, and we treat and repaint rusted steel sections with a marine-grade coating before reinstalling. On older ornamental gates in Playa del Rey or San Pedro, we also check the post footings, because rust often travels down into the concrete and weakens the whole assembly. Call (619) 350-4659 for a free assessment of your coastal gate hardware.
Yes, we repair original wrought iron gates on Los Angeles heritage homes routinely. The steel in those 1920s and 1930s gates is usually sound, but the welds at hinge straps, scroll work, and latch mechanisms fatigue and crack after ninety years of sun, damp, and daily use. We re-weld cracked joints, reinforce weakened sections, and fabricate replacement scroll pieces to match the original profile. We don’t recommend replacing a historic gate unless the steel has rusted through in enough places that repair would cost more than replacement. Call (619) 350-4659 and we’ll assess your gate and give you a straight answer.
UL 325 is the safety standard that governs automatic gate operators, and it requires entrapment protection devices like photoelectric sensors and contact edges that stop and reverse the gate if a person, pet, or vehicle is in its path. Any automatic gate in Los Angeles should have functioning entrapment protection, both for safety and because a gate that doesn’t meet the standard is a liability on your property. We verify and recalibrate photoelectric sensors, check contact edges for wear, and ensure the operator’s force settings are within safe limits on every automatic gate repair we complete. Call (619) 350-4659 if you’re unsure whether your gate meets the standard, and we’ll check it during a free estimate.
Key Takeaways
- Gate repair in Los Angeles typically costs $195 to $680 for most hinge, post, and operator work.
- Coastal and hillside neighborhoods create failures that flat-grid inland cities rarely see: salt corrosion, Santa Ana wind overload, and slope settling.
- We repair and convert gates every week for Los Angeles homeowners, with a written 90-Day Done Right Promise on every job.
- Same-day and emergency repairs are available, and a live person answers the phone 24 hours a day, 7 days a week.
- Call (619) 350-4659 for a free estimate before any work starts.
If your gate is dragging, rusted, or dead, call (619) 350-4659. We’ll send a technician who knows Los Angeles gates, we’ll quote the full price before any work begins, and we’ll stand behind the repair in writing. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Los Angeles since 1984.