Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills is not an off-the-shelf job. The homes here, particularly the hillside estates north of Sunset in 90210, demand heavy custom-fabricated gates tied into whole-estate automation, while the older Spanish Colonial Revival houses in the Flats call for period-appropriate wrought iron mounted to masonry pillars that have been settling for decades. Our crews know the difference, and we schedule work in Beverly Hills with enough lead time to pull the right permits from the city’s own Building and Safety Department, which operates separately from Los Angeles. If you’re planning a new driveway gate, a pedestrian gate, or a full automated security gate, call (619) 350-4659 and we’ll walk you through what your property actually needs.
Why Ironworks Gate Co. Is Beverly Hills’s Preferred Gate Installation Company
Our Gate Installation team has handled some of the most demanding properties in this city, from bespoke dual-swing gates on cold-rolled steel posts to low-profile pedestrian entrances that have to clear a 45-foot setback line. Homeowners here tend to have lived in their houses for twenty years or more. They’ve dealt with contractors who underbid, underbuilt, and disappeared. That’s why we put the price in writing before a single bolt is turned, and why every completed job carries our 90-Day Done Right Promise in writing, no paperwork, no arguing.
Victor Salinas, who leads our crew, has walked more Beverly Hills driveways than he can count. He’s the one checking post footings on Trousdale Estates properties and verifying operator torque specs on Benedict Canyon. A live person answers our phone 24 hours a day, 7 days a week. When you call about a gate installation in Beverly Hills, you speak to someone who knows the difference between a 90210 hillside cantilever slide and a 90211 Flats single-swing, not a call center reading a script.
Our Gate Installation Services in Beverly Hills
Driveway Gate Installation
Driveway gates in Beverly Hills run the full range, from compact single-car wrought iron in the Flats to 18-foot estate entrances on Coldwater Canyon. We install both track-guided and cantilever-slide configurations. For hillside properties where the grade changes across the driveway opening, cantilever is often the only option that won’t bind, and we spec the heavier posts and reinforced concrete footings that survive seismic creep without shearing mounting bolts.
Pedestrian Gate Installation
Pedestrian gates are where period correctness matters most, especially on the 1920s and 1930s homes south of Santa Monica Boulevard. We fabricate gates to match the original ironwork detailing, whether that’s a simple arched top or a more involved scroll pattern. Mounting to existing masonry pillars is standard practice here, and we account for the fact that many of those pillars have shifted fractions of an inch over sixty or seventy years.
Sliding Gate Installation
Sliding gates make sense on Beverly Hills properties where a swing gate would arc into landscaping, a retaining wall, or a steep grade change. We install cantilever slides with no ground track, which keeps the gate operating cleanly even when hillside debris and oak litter accumulate at the base. Underground loop detectors go in below the asphalt, and we coordinate the sensor placement with your existing irrigation lines so the install doesn’t nick a sprinkler main.
Swing Gate Installation
Swing gates remain the most common choice in Beverly Hills, especially dual-swing configurations on wider driveway mouths. The engineering question nobody asks but everyone eventually faces: will the hinge posts hold true over the next twenty years? We pour footings deep enough to resist the slow settling that’s common in the hills, and we build in adjustment capability so the gate can be re-trued years down the line without cutting and re-welding the frame.
Double Gate Installation
Double gates, also called dual-leaf or bi-parting gates, are the standard for wider estate driveways in Beverly Hills. Each leaf runs on its own operator, and we sync them so they close without a gap or a stutter. The tricky part on hillside lots is making sure both leaves travel level despite side-to-side grade differences, which is why we always survey the driveway path before fabricating the gate panels.
Security Gate Installation
Security gates in Beverly Hills are a different category than what most neighborhoods need. Here, a gate is often the first physical layer of a larger estate security system that includes cameras, intercom, and sometimes full-time staff. We integrate gates with existing CCTV and intercom infrastructure, and we work with your alarm contractor so the gate trigger isn’t fighting the security system’s relay logic.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Beverly Hills
We are factory-trained and equipped on nine gate-automation brands, and the ones we see most often in Beverly Hills are FAAC, BFT, DoorKing, and Viking. Each has its own control board logic and its own quirks after a firmware update. Because we stock common parts for these brands locally, we don’t make Beverly Hills customers wait a week for a capacitor or a limit switch that a distributor has to ship from Texas. When a DoorKing board drops its RS-485 handshake with a Crestron processor, we diagnose and repair it on the spot instead of swapping parts until something sticks.
Common Gate Installation Problems We See in Beverly Hills Homes
- Marine-layer moisture wrecking hinge hardware: The hills trap the marine layer overnight, and that persistent moisture cycling causes pivot bearings on custom steel gates to seize within a few years. We use sealed bearings and moisture-rated hardware on every install, then verify torque settings at completion.
- Seismic creep binding the gate leaf: Slow post and pillar settling from decades of seismic activity, including the long tail of Northridge, throws gate alignment off by just enough to bind operators and shear mounting bolts. Our footings and re-truing procedures are built for that reality.
- Home automation integration mismatches: Many gates in the hills are tied into Crestron, Control4, or Lutron. A routine firmware update on the intercom board can drop the RS-485 handshake, making a perfectly functional gate appear dead. Technicians who don’t understand the integration layer replace the wrong part. We don’t.
- Permit and inspection delays from Beverly Hills Building and Safety: Beverly Hills runs its own plan-check and inspection process, separate from the City of Los Angeles. Homeowners who assume an LA permit covers them get stopped mid-project. We know which projects require BH plan checks and we file them before fabrication begins.
Pricing for Gate Installation in Beverly Hills, CA
A single-leaf pedestrian gate in the Flats typically runs $1,800 to $3,500 installed, including hardware and finish. A standard single-vehicle swing gate with one operator runs $4,500 to $8,000. A dual-swing or sliding estate gate with automation, safety edges, loop detectors, and intercom integration runs $9,000 to $22,000, and the top end assumes custom fabrication, heavy posts, and whole-estate automation tie-ins. Security gates with integrated CCTV and access control start around $12,000 and go up with camera count and integration depth. Every quote is written, itemized, and agreed before we order a single weld. Call (619) 350-4659 for a free estimate, and we’ll put the numbers on paper for your exact driveway.
We Also Serve Cities Near Beverly Hills
While most of our Beverly Hills work comes from the 90210, 90211, and 90209 ZIP codes, we regularly handle gate installations in surrounding communities. We serve Culver City, Santa Monica, Venice, and Marina del Rey, and we coordinate scheduling and dispatch from our Los Angeles office so service across the Westside stays tight and on-time.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Beverly Hills
Yes, in most cases. Beverly Hills operates its own Building and Safety Department, entirely separate from the City of Los Angeles, so a permitted gate automation or structural pillar project requires BH’s own plan-check and inspection. We handle the permit filing and coordinate with inspectors so the project stays on schedule. Call (619) 350-4659 and we’ll tell you whether your specific project triggers a permit.
Yes, and we do it regularly. The 1920s through 1950s homes in the Beverly Hills Flats and surrounding 90211 neighborhoods have specific ironwork patterns that off-the-shelf gates never match. We fabricate from photos, original plans, or the surviving gate hardware on your property, and we finish the iron to match the existing patina rather than spraying it with a generic gloss that looks wrong on a ninety-year-old house.
Hillside gates in Beverly Hills fall out of alignment because the ground under the posts shifts slowly over time, a product of seismic creep and soil settlement that most installations don’t properly address. We prevent it by pouring post footings four feet deep or deeper, depending on soil conditions, and by building adjustment capacity into the hinge assemblies so the gate can be re-trued without cutting and re-welding. If your existing gate keeps binding, call us, the fix is usually faster than you expect.
Yes. We integrate new gate operators into Crestron, Control4, and Lutron systems regularly, and we test the RS-485 and relay handshakes before we leave the property. The most common failure point after installation is a firmware update on the intercom or automation controller dropping the handshake, which makes the gate appear dead while the operator itself tests fine. We document the integration settings so your home automation contractor can maintain the system without guessing.
Yes, UL 325 requires entrapment protection on all automated gate installations, and every gate we install includes the required protection, typically a combination of inherent entrapment sensing in the operator plus external monitored photo eye sensors or contact edges. On Beverly Hills estates with long driveway approaches, we often add a second set of photo eyes at the property line in addition to the pair at the gate itself. This is not optional equipment, and anyone who quotes a gate without it is not quoting a legal installation.
Call Ironworks Gate Co. for Gate Installation in Beverly Hills
We’ve been doing this work for over 42 years, and we plan to be doing it for another forty. When you’re ready to talk about your gate, call (619) 350-4659. You’ll get a live person, a straight answer, and a written price before any work begins. Victor and the crew know Beverly Hills, they know what the hills do to a gate over twenty years, and they build every installation like it’s going on their own mother’s driveway.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Beverly Hills gate installation and repair needs with over 42 years in the trade.