Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Inglewood
Gate repair in Inglewood usually runs between $195 and $480 for common fixes like hinge replacement, weld repair, and gate realignment, while electric gate motor and board replacements typically land in the $450 to $1,200 range depending on the opener brand. Most repair calls in the 90301, 90302, and 90303 ZIP codes are completed in a single visit by our crews. We answer the phone live around the clock, and we quote every job before a single bolt gets turned. If your gate is sagging, dragging, or dead on its track, call (619) 350-4659 and tell us what you are seeing. We will give you a straight answer and a real number.
Inglewood’s mix of 1940s to 1960s bungalows, small apartment courts, and newer gated properties means we see the full range of gate problems here: original wrought-iron hinges rusted to the point of failure, automated slide gates that were installed for event-day rentals and have since burned through three boards, and everything in between. Our Gate Repair team works this city every week, and we know exactly which failures repeat on which blocks.
Why Ironworks Gate Co. Is Inglewood’s Preferred Gate Repair Company
Ironworks Gate Co. was founded in 1984, and for over 42 years we have specialized in one thing: gates. Driveway gates, pedestrian gates, estate gates, slide gates, swing gates. The hinges, the welds, the operators, the loops, the keypads. We do not do fences, windows, siding, or whatever else comes through the door. When a homeowner in Inglewood calls us, the person who answers has likely rebuilt a gate exactly like theirs in the last month.
Victor Salinas leads our crew, and he sets the standard: background-checked, uniformed technicians who work in your driveway the way they would work in their own mother’s. Every job, whether it is a $89 seasonal tune-up or a full gate and operator replacement, gets the same care and the same written guarantee. We call it the Keystone Standard, and it applies to every completed job we do in Inglewood, no exceptions.
When your gate fails, you do not want a callback queue. You want a live person on the line who can tell you when the truck rolls. That is what we do, 24 hours a day, 7 days a week. Call (619) 350-4659 in the middle of a Sunday afternoon and you will talk to a person, not a recording.
Our Gate Repair Services in Inglewood
Electric Gate Repair
Electric gate repair in Inglewood frequently comes down to marine-layer moisture working its way into operator boards, limit switches, and connections. We service nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a LiftMaster board that fails in Inglewood may need a specific sealed enclosure upgrade to survive the next five years of coastal humidity, not just a board swap. Our techs carry the common parts for these brands and can usually diagnose and repair an electric gate in one visit. A typical electric gate board replacement in Inglewood runs $450 to $900, depending on the brand and model. Motor replacements run $600 to $1,200. We quote the exact number before the work starts.
Automatic Gate Repair
Automatic gates in Inglewood take a beating from heavy event-day traffic near the stadium corridor plus the constant salt-air exposure. Slide gate motors on multi-tenant apartment courts fail at a rate we simply do not see inland. Those low-cost kits installed for short-term rental demand often were never sized for 40 or 50 open-and-close cycles a day, and the marine layer eats the control boards. We standardize on sealed enclosures, stainless steel hardware, and properly sized motors when we repair automatic gates here. A full automatic gate motor replacement with rail adjustment in Inglewood runs $650 to $1,400 on average.
Hinge & Post Repair
This is the most common repair we do in Inglewood, and it is not close. Homes in the 90301, 90302, and 90303 ZIP codes are heavy with original 1940s to 1960s wrought-iron gates, and the hinge posts on those gates corrode at the concrete line after fifty or sixty years of salt-laden air. The post rots through at the base, the gate sags three inches, and the latch side drags against the driveway until the homeowner gives up and just leaves it open. We cut out the corroded post footing, weld in a new steel post with a reinforced base plate and stainless steel fixings, swap the old hinges for sealed bearing hinges, and realign the gate so it swings true. Depending on the condition of the existing post footing, hinge and post repair in Inglewood typically runs $250 to $650 per post.
Gate Realignment
Sometimes the gate is not broken. It has just settled. The post is slightly out of plumb, the hinges have worn, or the concrete apron has shifted over forty years of Inglewood’s clay-heavy soil. We reset posts, rebuild hinge packs, and adjust gate travel so the gate closes without dragging or binding. Gate realignment in Inglewood typically runs $195 to $400, and it is the repair that buys you the most time before a full gate replacement becomes necessary.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
We are factory-trained and equipped to service LiftMaster, FAAC, Elite, Mighty Mule, and five other major automation brands. Whatever opener is on your driveway, we have likely already rebuilt one like it in Inglewood this month. We stock the common failure parts for the brands that dominate this market, so most repairs do not require a second visit. A LiftMaster board replacement on an Inglewood slide gate, for example, is usually a same-visit fix because we keep the boards on the truck. No waiting on a part to ship. No second service call fee.
Common Gate Repair Problems We See in Inglewood Homes
- Hinge posts rotted at the concrete line. The marine layer just five miles from the Pacific pushes salt-laden air into every seam and joint. On 1940s to 1960s ornamental gates, the original steel posts often rot through right where they meet the concrete footing, and the gate sags until it drags. This is the most common gate failure in Inglewood, and it requires cutting out the old footing, welding in a new post, and using stainless steel fixings to prevent a repeat.
- Operator boards burned out from moisture intrusion. Low-cost slide gate motors installed during the SoFi Stadium renovation wave were never sealed for coastal humidity. The boards corrode, short out, and fail. We see the same three or four cheap kits fail over and over on blocks near the stadium corridor. The fix is a sealed enclosure and a properly rated board, not another cheap swap.
- Rack and pinion tracks pulling free from old concrete. Many Inglewood driveways were poured in the 1950s and 1960s, long before motorized slide gates were common. The concrete was never engineered for the lateral load a motorized gate puts on the track. We see tracks pulling free, anchors ripping out, and gates jamming mid-travel on older apartment courts. The repair means re-anchoring the track with proper structural fasteners and often re-pouring a section of the driveway edge.
- Welded joints cracking after decades of salt-air exposure. Ornamental iron gates from the 1950s and 1960s were built with mild steel and plain welded joints. After fifty years of coastal humidity, the welds rust through and sections of the gate start to separate. We grind out the failed welds, re-weld the joints with proper penetration, and apply a rust-inhibiting coating that holds up in Inglewood’s specific climate.
Pricing for Gate Repair in Inglewood, CA
Here is what we charge for common gate repairs in Inglewood, so you have a real number before you call:
- Gate realignment: $195 to $400
- Hinge and post repair: $250 to $650 per post
- Weld and rust repair: $180 to $500 depending on the extent of corrosion
- Electric gate board replacement: $450 to $900
- Automatic gate motor replacement: $600 to $1,400
- Seasonal tune-up: $89
These are the ranges we have quoted and billed across the 90301, 90302, and 90303 ZIP codes in the last year. Every quote is agreed to before we touch a single bolt. You will never get a bill that surprises you, and every job is backed by our written 90-Day Done Right Promise. We also offer $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (619) 350-4659 for a free estimate, and we will give you the exact number for your gate.
We Also Serve Cities Near Inglewood
If you are outside the immediate Inglewood area, we also cover Culver City, Playa del Rey, Los Angeles, and Marina del Rey. Our crews work the whole metro area, and the same pricing, the same warranty, and the same live-answer phone line apply everywhere. For details on our coverage across the wider region, see Gate Repair in Inglewood.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Inglewood
Inglewood sits roughly five miles from the Pacific, and the persistent marine layer carries mild salt-laden air over the city year-round. That air settles into hinge barrels, post footings, and welded joints, accelerating oxidation at a rate noticeably faster than inland cities like Hawthorne or Lawndale. Original 1940s to 1960s gate hardware in Inglewood typically lasts forty to sixty years before the hinge posts rot through at the concrete line, while the same hardware inland may last another ten to fifteen years. The salt air does not cause a single dramatic failure; it works slowly, year after year, until the post gives way. When we repair or replace hinges and posts in Inglewood, we specify galvanized or stainless steel fixings and sealed bearing hinges because that is what actually holds up in this marine environment. A painted mild steel hinge will start rusting again within a season. Call (619) 350-4659 if you want an honest assessment of whether your gate hardware is at the point of repair or replacement.
The SoFi Stadium and Hollywood Park development boom after 2020 triggered a wave of rapid property upgrades across the 90301 to 90303 ZIP codes, with homeowners and landlords installing electric slide gates to capture rising property values and short-term rental demand on game days. Many of those gates were installed quickly and cheaply, using low-cost kits not sized for heavy daily cycling or sealed for coastal humidity. The boards burn out, the motors overheat, and the tracks pull free from aging concrete driveways that were never designed for motorized gate loads. We routinely rebuild these systems with properly sealed enclosures, correctly rated motors, and structural track anchoring. A repair on one of these event-day rental gates in Inglewood typically runs $450 to $1,200 depending on what has already failed. The free second opinion on any written estimate applies here too. Call (619) 350-4659 and we will tell you what is actually going on.
Yes, and this is a big part of our work in Inglewood. The 1940s to 1960s stucco bungalows and small apartment courts that dominate this city were often built with ornamental wrought-iron driveway and pedestrian gates, and the original hardware is long out of production. You cannot order a hinge for a 1958 gate online. We fabricate or adapt what is needed: new hinge posts cut and welded to match the original profile, replacement latch plates machined to fit, pickets spliced in where rust has eaten through. We have done this kind of work for decades, and the finished repair is typically stronger than the original because we use modern steel grades and stainless fixings. A typical weld-and-fabrication repair on an older Inglewood gate runs $250 to $650, depending on how much of the original iron survives. Call (619) 350-4659 and describe what you have. We have probably repaired a similar gate on a similar street in Inglewood.
Almost always, yes. The gate panel often remains straight and true, which misleads homeowners into thinking the problem is the latch or the pavement. What is actually happening is that the hinge post has corroded at the base, either underground or right at the concrete line, and the entire gate has rotated slightly so the latch-side bottom corner drags. This is a classic Inglewood failure pattern driven by salt-air corrosion on original posts. On a 1948 stucco bungalow off Century Boulevard in the 90303 ZIP, our tech found the original ornamental swing gate’s hinge post had rotted through at the base, causing a three-inch sag that dragged the latch side. We cut out the corroded post footing, welded in a new steel post with a reinforced base plate and stainless steel fixings, then realigned the gate and swapped the original brass hinges for sealed bearing hinges. The gate now swings true and no longer scuffs the driveway. That repair came in at under $600 and the gate will outlast the house. If your gate is dragging, call (619) 350-4659. The sooner you catch the post rot, the more of the original gate we can save.
We do both. Solar gate openers are genuinely useful in Inglewood because many of the older bungalows and apartment courts have limited conduit runs to the driveway, and trenching new power from the panel can cost more than the opener itself. Mighty Mule and LiftMaster both make solar-compatible openers we service regularly here. The salt-air issue applies to solar systems too: the panel, battery, and controller board all need sealed or sheltered installation to survive Inglewood’s marine layer. A solar gate opener repair in Inglewood typically runs $350 to $850 depending on whether the panel, the battery, or the control board has failed. A full solar opener installation runs $1,200 to $2,200 with battery backup and proper weather sealing. Call (619) 350-4659 and we will tell you whether solar makes sense for your specific driveway, and what it will cost.
Call Ironworks Gate Co. for Gate Repair in Inglewood
When your gate fails, call (619) 350-4659 and talk to a live person who knows gates and knows Inglewood. We will give you a straight assessment, a real price range, and a written quote before any work starts. Every job is backed by the 90-Day Done Right Promise, and every technician who shows up is background-checked, uniformed, and trained on nine major automation brands. The company that makes a 40-year-old gate close like the day it was hung. That is the standard in Inglewood, and we stand behind it.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood homeowners and property owners with dedicated gate repair since 1984.