Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Inglewood
If you live in Inglewood and your gate is sagging, dragging, or refusing to close, the problem is rarely the whole gate. Most of the time it comes down to a failed hinge, a rotted post, or a tired weld joint that gave out after 40 or 50 years of marine air. We fix those problems every week in Inglewood. Victor Salinas and the team at Ironworks Gate Co. handle gate parts and welding for homeowners across 90301, 90302, and 90303, and we typically reach most Inglewood addresses the same day you call. Reach us at (619) 350-4659 and you will talk to a person, not a phone tree.
Why Ironworks Gate Co. Is Inglewood’s Preferred Gate Parts & Welding Company
Ironworks Gate Co. has been doing this work for over 42 years, and the Gate Parts & Welding crew has seen just about every failure a gate can produce. Inglewood presents its own set of problems, and we know them well. The housing stock here tells the story: 1940s and 1960s stucco bungalows with original ornamental iron gates, small apartment courts with pedestrian gates that have seen decades of tenant traffic, and newer electric slide gates added quickly around the stadium corridor. Each one fails differently.
Our dispatch and scheduling run out of our Los Angeles office, but our crews are in and around Inglewood constantly. That means a shorter drive, a faster arrival, and a technician who already knows the neighborhood. We do not farm work out to subcontractors. Every technician is background-checked, uniformed, and works by a simple code: Krafted right, Every time, Your home first, Standing behind it.
Every job we complete carries a written 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing. Victor Salinas insists on it. It is the same standard we have applied to every job since 1984.
Our Gate Parts & Welding Services in Inglewood
These are the four services we perform most often for Inglewood homeowners. Each one is quoted before we start, and the price we quote is the price you pay.
Hinge Replacement
Inglewood sits roughly five miles from the Pacific, and that means salt-laden humidity finds its way into every hinge barrel and weld joint on your gate. We regularly replace hinges that have seized solid or worn thin enough to snap. On 1940s-era ornamental gates, the original hinges are almost always custom-sized and no longer manufactured, so we fabricate replacements that match the original profile and mount them to fresh steel rather than patching rusted stock.
Post Replacement
A sagging swing gate in Inglewood usually means the post has rotted at the footing, not that the gate frame is bent. The marine layer keeps the bottom six inches of a steel post damp for much of the year, and after 40 to 60 years that section gives way. We cut the old post at ground level, weld in a new sleeve or full post, and set it in concrete properly so the gate hangs plumb and swings freely. This is the repair that fixes the problem permanently instead of buying you another six months.
Rail Repair
Slide gates are popular on Inglewood apartment courts and rental properties, especially near SoFi Stadium where landlords have added motorized gates for game-day parking. The trouble is that many of those gates were installed on concrete driveways that were never poured to handle motorized loads. The rack pulls free from the concrete, the gate drifts off line, and the motor strains until it fails. We cut out the damaged rail section, weld in a new steel rail, and anchor the rack so the gate rolls true again.
Custom Welding
When a 60-year-old decorative iron gate breaks at a scroll or a picket, there is no replacement part to order. We weld it. Our team does TIG and MIG welding on ornamental iron, steel, and aluminum, repairing cracks, rebuilding rotted sections, and matching the original design. If the damage is too far gone, we can fabricate a replacement section that matches the original gate’s look so the repair does not stand out like a patch.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
Ironworks Gate Co. is trained and equipped on nine gate-automation brands, including Ghost Controls, DoorKing, and Elite. That matters in Inglewood because the old FAAC and LiftMaster units on 1980s security gates do not talk to modern safety equipment. When a control board fails, we know whether it can be retrofitted with a safety photocell and loop detector or whether the operator is obsolete and needs a full swap. We stock common parts locally so most Inglewood repair calls are finished in a single visit.
Common Gate Parts & Welding Problems We See in Inglewood Homes
- Corroded hinge posts snapping at the footing. Forty to sixty years of marine-layer humidity eats through the post bottom, the gate sags into the driveway, and the opener motor fights the misalignment until it burns out. We replace the post sleeve and rehang the gate.
- Low-cost slide gate kits pulling free from aging concrete. Landlords near SoFi added electric gates for event-day rentals, but the concrete was never designed for motorized loads. The rack and pinion track tears loose, and the gate starts binding. We weld in a proper steel rail and re-anchor the track.
- Obsolete control boards that cannot support modern safety retrofits. Legacy operators from the 1980s and 1990s often lack ports for safety photocells or loop detectors required under UL 325. A board replacement can work, but sometimes the honest answer is a full operator upgrade.
- Custom hinges and latches that are no longer manufactured. Ornamental gates on Inglewood’s older bungalows were often built with hardware that no catalog carries today. We fabricate replacements in our shop and match the original profile so the gate works and looks right.
Pricing for Gate Parts & Welding in Inglewood, CA
Gate repair in Inglewood is not one flat number, but here is what to expect. A hinge replacement on a standard swing gate typically runs $180 to $340 per hinge, depending on the gate weight and whether we need to fabricate a custom hinge to match the original. A full post replacement with new concrete footing runs $450 to $850. Rail repair on a slide gate averages $300 to $600, including the new steel rail section and rack alignment. Custom welding work starts around $150 for a simple crack repair and runs up from there based on the size of the damage.
The SoFi-driven rental surge has pushed some Inglewood landlords to patch gates repeatedly with cheap fixes, and they end up paying more over two years than a proper repair would have cost once. We quote the job before any work starts, in writing, and offer free estimates on every call. A new operator or full gate replacement may be cheaper over five years than nursing a 60-year-old gate that fails every season. We will tell you honestly which one applies.
We Also Serve Cities Near Inglewood
Along with Inglewood, our gate parts and welding crews regularly work in Inglewood and the surrounding communities, including Culver City, Playa del Rey, Los Angeles, and Marina del Rey. If you are in any of those areas and your gate is failing, the same team and the same written guarantee apply. Call (619) 350-4659 and we will get you scheduled.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Inglewood
Ninety percent of the time the motor is fine and the hinges or post are the real problem. When a hinge post rots at the footing, the gate drops and drags, and the opener trips its safety limit because it is fighting the extra load. We replace the hinges or post, re-align the gate, and the motor runs normally again. Call (619) 350-4659 for a free diagnostic, and we will tell you whether the operator was damaged before we do any work.
Yes, if the control board has the terminals for it. Older FAAC boards from the 1990s sometimes do not, and then the choice is a new board or a full operator. We stock retrofit photocells and loop detectors for most major brands, and our technicians can tell you on the first visit which path applies to your gate.
We can weld in a new steel rail and re-anchor the rack to the existing concrete in most cases, as long as the concrete itself is not cracked through. If the slab has broken up where the track sits, we will say so, and patching concrete is part of the fix. We will quote the whole job before starting. Call (619) 350-4659 for a free estimate.
Yes. That exact situation is common on Inglewood’s 1940s bungalows and apartment courts. We fabricate hinges, latches, and replacement pickets in our shop to match the original profile. Nothing about your gate gets replaced with a generic part that looks wrong.
If the keypad beeps and the gate does not move, the keypad is usually working and the issue is in the operator, the loop detector, or a relay. If the keypad is dead entirely, it may be a power or wiring fault. We test both sides and replace only what has failed. Our technicians service most major brands including DoorKing and Ghost Controls, so we can diagnose it on the first trip. Call (619) 350-4659 and we will be out to Inglewood the same day in most cases.
Call Ironworks Gate Co. for Gate Parts & Welding in Inglewood
If your gate is sagging, grinding, or refusing to open, call us at (619) 350-4659. We offer free estimates, upfront pricing before any work starts, and the 90-Day Done Right Promise in writing. Victor Salinas and the team will come out to Inglewood, find the real problem, and fix it so you do not have to think about it again. A live person answers the phone 24 hours a day, 7 days a week. Call today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Inglewood and surrounding communities since 1984.